Inpatient scheduling for patients with B-cell precursor ALL1
- Consolidation phase for Ph(–) disease: Hospitalization is recommended for the first 3 days of the first cycle and the first 2 days of the second cycle
- MRD(+): Hospitalization is recommended for the first 3 days of the first cycle and the first 2 days of the second cycle
- R/R: Hospitalization is recommended for the first 9 days of the first cycle and the first 2 days of the second cycle
For all subsequent cycle starts and reinitiation (eg, if treatment is interrupted for 4 or more hours), supervision by a healthcare professional or hospitalization is recommended.
Outpatient considerations2
When not hospitalized, patients may potentially be treated with BLINCYTO® at one of the following locations:
Patients may have the option of receiving BLINCYTO® treatment at home after the initial hospital stay recommendation, with supervision by a
healthcare professional
Continuous IV infusion2
Administration of BLINCYTO® requires cIV infusion for delivery at a constant flow rate using an infusion pump that is programmable, lockable, non-elastomeric, and has an alarm.
BLINCYTO® infusion bags are admixed to infuse over:
Infusion duration and rates2
The information provided here is an abbreviated summary and does not replace the Instructions for Use (IFU). Please consult the IFU when preparing BLINCYTO®.
The final volume of infusion solution is more than the volume administered to the patient to account for the priming of the IV tubing and to ensure that the patient will receive the full dose of BLINCYTO®.
- Infuse BLINCYTO® solution according to the instructions on the pharmacy label on the prepared bag at one of the following constant infusion rates:
- Infusion rate of 10 mL/hour for a duration of 24 hours
- Infusion rate of 5 mL/hour for a duration of 48 hours
- Infusion rate of 1.8 mL/hour for a duration of 72 hours
- Infusion rate of 1.8 mL/hour for a duration of 96 hours
- Infusion rate of 0.6 mL/hour for a duration of 7 days
- For 24-hour and 48-hour BLINCYTO® bags, the solution must be administered using IV tubing that contains a sterile, nonpyrogenic, low protein-binding, 0.2 micron in-line filter; do not use an in-line filter for the 72-hour, 96-hour, and 7-day infusion bags
At the end of the infusion, any unused BLINCYTO® solution in the IV bag and IV tubing should be disposed of in accordance with local requirements.
IMPORTANT NOTE: Do not flush the BLINCYTO® infusion line, especially when changing infusion bags. Flushing when changing bags or at completion of infusion can result in excess dosage and complications thereof. When administering via a multi-lumen venous catheter, BLINCYTO® should be infused through a dedicated lumen.2 Before flushing the catheter system, residual amounts of BLINCYTO® must be aspirated from the catheter system to avoid bolus administration.2